Source smarter with
Leverage AI to find the perfect product match in seconds
Matches from over 100 million products with precision
Handles queries 3 times as complex in half the time
Verifies and cross-validates product information
Get the app
Get the Alibaba.com app
Find products, communicate with suppliers, and manage and pay for your orders with the Alibaba.com app anytime, anywhere.
Learn more

V70 oil

(8211 products available)

About v70 oil

Types of V70 oils

V70 oils are specially formulated for use in volvo v70 cars. There are different types of v70 oils available in the market. They include;

  • Semi-Synthetic Engine Oil

    This is a blend of synthetic and conventional oil. It has more additives than conventional oil, offering better protection for engine parts. The oil works well in both low and high temperatures and is compatible with most vehicles.

  • Full Synthetic Engine Oil

    The oil is manufactured from chemical compounds and has no natural additives. It provides the best protection for engine parts, especially those in high-performance and modern engines. The oil works well in extreme temperatures and is more expensive than other engine oils.

  • Conventional Oil

    This is a refined oil from crude oil. It has fewer additives and doesn't last long, needing frequent changes. It is compatible with older engines and is the most affordable option among the different types of v70 engine oils.

  • High mileage oil

    High mileage oil is made for vehicles with more than 100,000 miles on the odometer. It has special additives that protect the engine from leaks and improve the elasticity of the engine seals. This prolongs the life of older vehicles.

  • Diesel engine oil

    Diesel engine oil is specially made for diesel engines. It has more detergents to remove soot and any other debris that may build up in the engine. The oil keeps the engine clean and improves its performance.

How to choose v70 oils

V70 engine oil is a critical aspect of any vehicle's performance and durability. Therefore, it is essential to consider several factors when choosing the right v70 motor oil for a specific vehicle:

  • Viscosity rating

    The viscosity rating indicates how thick or thin the oil is at different temperatures. A single-grade oil has only one viscosity rating, while multi-grade oil is formulated to work at different temperatures. Opt for a multi-grade oil, such as 10W-40, that stays thick enough to protect the engine components at operating temperatures. The cold start protection is also good at lower ambient temperatures.

  • OEM viscosity recommendations

    Always follow what the original equipment manufacturer (OEM) recommends as the best viscosity rating for the vehicle. It will be indicated in the owner's manual. They conduct tests to know what oil works best to ensure the engine lasts for many miles.

  • Driving conditions

    Consider the driving conditions and how they affect engine oil performance. For example, driving on a dusty road puts a lot of debris in the engine. This causes the oil to wear down faster. An oil with a high detergent can clean out the particles and suspend them for easy removal during the next oil change. Stop-and-go traffic makes the engine run at low temperatures, which thickens the oil. A low-temperature viscosity improver keeps the oil thin for quick lubrication at low temperatures. Consider oils with additives that improve viscosity and oxidation to keep them thick for longer.

  • Engine age and mileage

    For older engines, consider v70 oils with additives that restore the engine seals and reduce leaks. Some even fill in minor scratches on the engine components to protect it from further wear. They also have detergents that clean up sludge and varnish to restore the engine to a like-new condition. These oils help the older engines run smoothly.

  • Manufacturer certifications

    Ensure the oil has certificates from manufacturers that meet or exceed the specifications of the oil. The certifications are proof that the oil meets the required quality standards. Some common certifications for v70 oil are API, ILSAC, ACEA, and JASO.

How to use, install, and product safety

V70 oil is a popular choice for keeping vintage Volvo cars running smoothly and looking great. Whether a mechanic or an enthusiast, here's how to get the best out of this oil.

How to use

  • Change the Engine Oil

    To change the engine oil, warm up the engine by running it for a few minutes. This helps thin the old oil, making it easier to drain. Then, turn off the engine and lift the car using jack stands for safety.

    Remove the oil drain plug and let the old oil drain into a pan. Replace the drain plug with a new washer. Then, remove the old oil filter using an oil filter wrench. Apply some new V70 oil to the rubber gasket of the new oil filter before installing it.

    Pour the new V70 engine oil into the engine using a funnel. Check the owner's manual for the correct oil capacity. Finally, run the engine for a few minutes and check for leaks around the oil filter and drain plug.

  • Top Off the Gear Oil

    To top off the gear oil, locate the gear oil fill plug on the manual transmission. Remove the fill plug and use a dipstick or squeeze bottle to check the oil level. The oil should be just below the fill hole.

    If it needs a top-off, slowly pour the V70 gear oil into the fill hole until it reaches the correct level. Replace the fill plug when done. Top off the rear differential oil in the same way.

  • Use as Power Steering Fluid

    To use V70 oil as power steering fluid, first locate the power steering fluid reservoir. Remove the cap and check the fluid level. If it needs to be topped off, slowly pour V70 oil into the reservoir until it reaches the correct level, which is usually near the "full" mark on the dipstick or translucent tank.

  • Use as Transmission Fluid

    To use V70 oil as transmission fluid, change the fluid by draining the old fluid. Run the engine to warm up the old fluid, then drain it. Remove the drain plug and let the old fluid drain completely.

Product Safety

V70 engine oil can be safe for use in vintage Volvo cars when used according to the manufacturer's specifications. Here are some safety tips to keep in mind:

  • Always follow the recommended oil change intervals provided in the vehicle's owner's manual.
  • Use the correct type and viscosity of V70 oil for the specific vintage model as recommended by Volvo engineers.
  • Ensure proper disposal of used oil and filters at a certified recycling center.

Functions, features and design of V70 oils

V70 oils are popular for their unique features and functions. Below are some of them:

  • One of the main functions of V70 engine oil is to clean and lubricate vital engine parts. The oil forms a thick layer between the moving engine components to prevent them from rubbing against each other. This saves wear and tear. It also has powerful cleansing agents that remove carbon deposits and sludge from the engine. The oil makes the engine run smoother and more efficiently.

  • These V70 oils have additives that help protect the engine from wear and tear. They form a thin layer between the moving parts, reducing friction and preventing overheating. Some oils have anti-wear additives that create a chemical reaction. It bonds the additives to the engine parts for permanent protection.

  • A V70 oil can maintain its viscosity and performance over a wide temperature range. This means it won't break down or thin out too much in extreme heat. The oil won't become too thick in cold conditions. It keeps the engine protected and running smoothly in different climates.

  • These oils have a low tendency to evaporate or turn into engine contaminants. An oil with low volatility will last longer in the engine. It also maintains better lubrication and protection for the engine.

  • Some V70 oils are made from natural plant sources. They contain biodegradable additives that allow them to break down easily. This helps to reduce pollution. They also have a lower carbon footprint during production and use.

Q&A

Q1: What is V70 oil used for?

A1: V70 oil is a special kind of lubricant. People use it in model cars, trains, and planes with moving parts. The oil makes the parts work well together by reducing friction and wear.

Q2: How does someone choose the right V70 oil for their model?

A2: To pick the best V70 oil, check the model's manual or website for recommendations. Think about the model's size and how fast it goes. A smaller model may need a lighter oil, while a bigger, faster model may need a thicker oil. Consider trying different viscosities to see which works best.

Q3: How does V70 oil benefit model engines?

A3: Using V70 oil keeps the moving parts in the model engine working smoothly. It helps parts stay cool by reducing friction and heat. The oil also keeps parts clean by removing tiny metal shavings from grinding. Overall, it helps the engine last longer and run better.

Q4: Is V70 oil easy to use in model engines?

A4: Yes, V70 oil is simple to use. Most models have a way to put in oil through a small hole. Remove the cap and use a dropper to add a few drops of V70 oil. Check the manual for how often to change the oil. It usually needs a change after a certain number of runs or hours of use.

Q5: Can V70 oil be used in real cars or other vehicles?

A5: No, V70 oil is only meant for model vehicles with small engines. Real cars need a different kind of oil that can handle the bigger engine and complex parts. Using model oil in a real car would not provide proper lubrication.