Ht60 3536804 3536805 turbocharger

Types of HT60 3536804 3536805 turbochargers

The HT60 3536804 3536805 turbocharger is a turbocharger that is used in heavy-duty diesel engines. The HT60 turbo is produced by the HT Turbine Technologies. HT60 turbochargers are employed in larger diesel engines that are used to power larger trucks and commercial vehicles. Some notable features of the HT60 turbo include a larger compressor wheel that enables it to move a large volume of air and a larger turbine housing that allows faster exhaust flow.

There are different types of HT60 turbochargers based on the compressor and turbine specifications. They include the HT60-1, HT60-2, HT60-3, HT60-4, and HT60-5 turbochargers.

• HT60-1 turbocharger:

  The HT60-1 turbo uses a single turbo system. It is the most common type of turbocharger used in heavy-duty diesel engines. As mentioned earlier, single turbocharged engines are the most common. This is because they are efficient, affordable, and quiet. The HT60-1 turbocharger improves the overall performance of the engine and is easy to maintain and replace.

• HT60-2 turbocharger:

  The HT60-2 turbocharger uses twin-turbo technology. The twin-turbo system uses two turbochargers. The first turbocharger compresses the air entering the engine, while the second turbocharger compresses the already compressed air before it enters the engine. The HT60-2 turbocharger is used in high-performance engines that require a lot of power. The two turbochargers work in sync to provide the engine with a steady stream of power. The HT60-2 turbocharger is often used in sports cars.

• HT60-3 turbocharger:

  The HT60-3 turbocharger uses a variable geometry turbocharger. The VGT technology enables the turbocharger to adjust to different engine speeds. This means that the turbine blades can be adjusted to control the amount of air flowing into the engine. As a result, the HT60-3 turbocharger improves engine performance and efficiency. VGT technology can be applied to both single and twin-turbo engine configurations.

• HT60-4 and HT60-5 turbochargers:

  The HT60-4 and -5 turbochargers are further modified versions of the HT60-1 and -2 turbochargers, respectively. The HT60-4 and -5 turbochargers are designed for extreme high-performance engines.

Specification and maintenance of ht60 3536804 3536805 turbocharger

Before purchasing a turbocharger for any vehicle, it is important to look at the specifications so that it can meet the desired needs and requirements. Here are the specifications for the turbocharger:

• Compressor side

  The diameter of the compressor wheel is 70 mm (2.76 inches).

  The compressor housing is made of aluminum.

  Its compressor wheel is designed for high-flow.

  The compressor has a pressure ratio of 4.0.

• Turbine side

  The turbine wheel diameter is 64 mm (2.52 inches).

  The turbine housing is cast iron.

  It has a standard-sized turbine wheel.

  The turbine housing is available in different A/R (Area Ratio) options, including 1.01, 1.15, and 1.30.

  The A/R is 1.15 for the turbine wheel.

• Center housing and rotating assembly (CHRA)

  The bearing is a journal.

  The bearing housing lubrication method is with engine oil.

  The center cooling is water.

  The turbine and compressor wheels are connected using a standard 9-bolt or 12-triple square (TX) bolt pattern.

  The turbine and compressor wheels are joined using a standard 12-bolt (12-triple square (TX) bolt pattern).

  The balance is done using a single-plane.

The HT60 turbocharger is a standard turbo for most medium-duty trucks. It is essential to take care of the turbocharger to ensure it works and lasts longer. Here are some maintenance tips:

• Oil changes: The turbo gets its oil from the engine. Therefore, it is crucial to follow the recommended oil change interval for the engine. The oil keeps the moving parts in the turbo lubricated and helps to reduce wear and tear. Also, be sure to use oil that meets the manufacturer's specifications.
• Pre-lube: Before taking off with a cold turbo, run the engine for at least 5 minutes. This allows the oil to flow through the turbo and lubricate the moving parts. Also, avoid hard acceleration during the first few minutes of engine operation.
• Air filter: The HT60 3536804 turbocharger draws air through an air filter. It is important to check the air filter regularly and clean or replace it as needed. This ensures the turbo gets the required air to perform optimally.
• Cool down: Before shutting down the engine, allow it to run for a few minutes. This cools the turbo before turning off the engine. It prevents coking, which is the formation of carbon deposits that can damage the turbo over time.
• Inspection: The turbo should be inspected regularly for wear and damage. Also, check the hoses and pipes for leaks or cracks and replace them as soon as possible.

How to choose ht60 3536804 3536805 turbocharger

Choosing the right turbochargers for vehicles can be a challenging task, considering the various factors that need to be put in place. Here are some of the factors:

• Read the vehicle manual to get the kind of turbocharger recommended by the manufacturer.
• Consider the model and make of the vehicle. Some turbochargers are specifically designed for certain car brands.
• Consult a mechanic when in doubt about which turbocharger to buy.
• Check the warranty period. This allows users to enjoy the turbocharger risk-free for a certain period.

How to DIY and Replace HT60 3536804 3536805 Turbocharger

Replacements of HT60 3536804 3536805 turbochargers should be done with great care since they are complex components. Here is how to replace the turbocharger:

Tools Needed:

• Socket set
• Wrench set
• Torque wrench
• Screwdrivers
• Oil drain pan
• New turbocharger kit
• New gaskets and seals
• Intercooler piping

Step-by-step guide

• Gather all the tools and components needed for the replacement.
• Make sure the engine is cool and disconnect the battery before starting the process.
• Drain the engine oil and remove the old oil.
• Remove the intercooler piping followed by the intake manifold.
• Use a socket and wrench set to remove the old turbocharger.
• Clean the mounting surface and install the new turbocharger.
• Reconnect the intercooler piping and intake manifold.
• Connect the oil lines and coolant lines.
• Reconnect the turbocharger to the exhaust manifold.
• Reinstall all the components that were removed in the first place.
• Start the engine and check for leaks and proper operation.

Q and A

Q: What is the warranty period for the HT60 3536804 3536805 turbocharger?

A: The warranty period for the HT60 3536804 3536805 turbocharger usually ranges from 12 to 24 months. Customers can return the product if it has any quality defects within the warranty period. Manufacturers offer after-sales services to help clients with troubleshooting and product support.

Q: How powerful is the HT60 3536804 3536805 turbocharger?

A: The HT60 3536804 3536805 turbocharger is a high-power turbocharger. It can generate about 300-500 horsepower, making it suitable for heavy trucks, construction machinery, and high-power engines.

Q: Can the HT60 3536804 3536805 turbocharger be customized?

A: Yes, the HT60 3536804 3536805 turbocharger can be customized according to the client's specifications. Clients can modify the turbine and compressor wheel sizes, bearing types, and housing dimensions to meet their requirements. Reach out to the manufacturer for customization options.