(195 products available)
Ready to Ship
Ready to Ship
Ready to Ship
Ready to Ship
A D722 oil pump is a crucial part of the oil circulation system in D722 diesel engines. It pumps engine oil from the oil pan and circulates it through the engine's oil galleries. The oil pump generates the flow and pressure needed to ensure that engine parts are lubricated and protected from frictional wear and heat. Because of their importance, various types of D722 oil pumps are available depending on the make and model of the vehicle. Here are some common types of D722 oil pumps.
Gear Oil Pumps:
Gear oil pumps use two or three interlocking gears to move oil through the pump. They are common in many D722 diesel engines because they are simple and reliable.
Vane Oil Pumps:
Vane oil pumps have a rotor with sliding vanes in a circular housing. As the rotor turns, the vanes move in and out, creating a variable volume that moves oil in and out of the pump. They are commonly used in hydraulic systems.
Rotary Gear Oil Pump:
Rotary gear oil pumps have one or more rotating lobes in a lobe-shaped housing. The lobes create a pumping chamber that expands and contracts to move oil. They are highly efficient and generate high pressure, making them suitable for high-pressure oil delivery.
Crankshaft Oil Pump:
The crankshaft is a mechanical part that converts the reciprocating motion of the pistons into rotational motion. The oil pump is usually attached to the crankshaft, and its rotation powers the oil pump to circulate oil. Crankshaft oil pumps are popular in D722 diesel engines due to their effective oil circulation and lubrication capabilities.
Positive Displacement Oil Pump:
Positive displacement oil pumps move a fixed amount of oil with each pump cycle. The flow rate remains constant regardless of pressure changes in the system. They are used in applications where consistent oil flow is needed, such as in lubrication systems.
Electric Oil Pump:
The oil pump is powered by an electric motor rather than being mechanically driven by the engine. Electric oil pumps are used in applications requiring precise oil delivery control, such as in variable lubrication systems or when starting the engine at low temperatures.
The D722 oil pump is made for the D722 engine. The D722 engine is a 4-cylinder, water-cooled diesel engine commonly used in small to medium-sized vehicles and machinery. It generates up to 36kW of power and has a displacement of 1.1 liters. The D722 engine is known for its reliability and fuel efficiency, making it a popular choice for applications requiring constant power and torque.
The specifications of the D722 oil pump are as follows:
Flow Rate
The D722 oil pump has a flow rate of 90 to 110 liters per minute. The flow rate depends on the engine's speed. When the engine's speed increases, the flow rate of the oil pump also increases. A higher flow rate ensures that oil reaches all the engine's moving parts, reducing friction and wear.
Pressure
The D722 oil pump generates a pressure of 3.5 to 4.5 bar. The pump's pressure is constant, even when the engine's speed varies. This constant pressure ensures that oil flows through the engine's channels at a steady rate, maintaining lubrication.
Viscosity
The D722 oil pump is designed to pump oil with a viscosity of 12 to 16 mm²/s at 100°C. Viscosity measures how easily the oil flows. Oils with higher viscosities are thicker and flow slowly, while those with lower viscosities are thin and flow quickly. The D722 oil pump requires oil with a viscosity that allows it to pump efficiently while providing adequate lubrication to the engine parts.
Regular maintenance of the D722 oil pump is crucial to ensure optimal performance and longevity. Here are some maintenance tips:
1. Oil Changes
Regular oil changes are essential to keep the oil pump working well. Change the oil every 5,000 km or according to the manufacturer's advice. Use oil with the right viscosity for the D722 pump.
2. Filter Replacement
The oil filter cleanss the oil before it enters the engine. Change the filter every time the oil is changed. This will stop dirt and debris from clogging the oil pump and keep it working smoothly.
3. Monitor Pressure and Flow
Use a gauge to check the pressure and flow from the oil pump. Low pressure or flow could mean the pump is wearing out. Address any issues early to prevent damage to the engine.
4. Inspect Hoses and Fittings
Check the hoses and fittings that carry oil to and from the pump. Look for cracks, leaks, or loose connections. Replace any damaged parts right away to avoid oil leaks that could harm the engine.
5. Keep it Clean
Keep the oil pump and surrounding area clean. Use a damp cloth to wipe away any dirt or grime. This will help the pump last longer.
Wholesale buyers should consider the following factors when choosing D722 oil pumps for their customers.
Flow Rate
The flow rate of a D722 oil pump is one of the most important factors to consider. Buyers should select oil pumps that have a flow rate that meets the needs of the target customer. A higher flow rate means that the oil pump can deliver oil faster, while a lower flow rate means that the oil pump delivers oil slowly.
Pressure
Another important factor to consider is the pressure of the oil pump. Buyers should select D722 oil pumps with pressure ratings that are compatible with the needs of their customers. High-pressure oil pumps are suitable for applications that require high pressure, while low-pressure oil pumps are suitable for applications that require low pressure.
Size and Weight
The size and weight of the D722 oil pump affect its portability and installation. Buyers should choose oil pumps that are compact and lightweight if their customers require portable oil pumps. Additionally, the size of the oil pump can affect its installation in tight spaces.
Durability
Buyers should select D722 oil pumps that have durable materials and construction. The durability of the oil pump is important because it affects the lifespan of the pump and reduces maintenance costs. Some D722 oil pumps are made with durable materials such as stainless steel and cast iron.
Ease of Installation and Maintenance
Buyers should choose D722 oil pumps that are easy to install and maintain. Some oil pumps come with user manuals that guide the installation process. Additionally, buyers can select oil pumps that have features that make maintenance easy, such as removable covers.
Cost
The cost of the D722 oil pump is an important factor that buyers should consider. Buyers should set a budget and choose oil pumps that are within the budget. It is important to note that the most expensive oil pumps are not necessarily the best. Buyers can get quality oil pumps at a reasonable price by comparing different suppliers on Chovm.com.
Warranty
Buyers should consider the warranty offered by the manufacturer or supplier. A longer warranty period is a sign that the manufacturer has confidence in the quality of their products. Additionally, the warranty protects the buyer from defective products.
To replace the D722 oil pump is not a difficult task. Below are the steps on how to replace the D722 oil pump:
One will need the following tools:
Steps
Q. Can anyone install the D722 oil pump?
A. No, it requires a qualified mechanic or someone with experience in working with engine parts.
Q. Which pump is better, D722, or D10?
A. The D722 is considered better because it is more advanced compared to the D10.
Q. Is the D722 Oil Pump used in all vehicles?
A. No, it is specifically designed for certain types of engines, particularly those in larger vehicles like trucks and tractors.
浙公网安备 33010002000092号
浙B2-20120091-4